Free tool

Siding Calculator

Find out how much siding to buy. Enter the distance around the house, the wall height, your gables, and how many windows and doors you have. The calculator gives the squares of siding to order, the number of panels, and the trim pieces that go with them.

Siding calculator

Squares to order (100 sq ft each)

15

Siding panels

171

Boxes (about 24 panels)

8

Net wall area

1,291 sq ft

Starter strip (12.5 ft)

12

J-channel (12.5 ft)

24

Outside corner posts (10 ft)

4

Openings removed

255 sq ft

Walls 1,350 sq ft plus gables 196 sq ft gives 1,546 sq ft. Minus 255 sq ft of openings leaves 1,291 sq ft. With 10% waste that is 1,420 sq ft, or 14.2 squares. Trim counts are estimates: J-channel covers window, door and gable edges only.

How to calculate how much siding you need

30 ft9 ft8 ftgableWall: 30 x 9 = 270 sq ftGable: 30 x 8 / 2 = 120 sq ftOpenings: 2 x 15 + 21 = 51 sq ftNet siding: 390 - 51 = 339 sq ft
  1. Measure the distance around the house at the base. Multiply it by the wall height from the ground to the eave. This is the wall area in square feet.
  2. Add each gable. A gable is a triangle: width x height / 2. Measure the width at the base and the height from base to peak.
  3. Subtract the openings. Use 15 sq ft for a 3 x 5 ft window, 21 sq ft for a 3 x 7 ft door, and 63 sq ft for a 9 x 7 ft garage door. Measure large or odd windows yourself.
  4. The result is the net siding area. Add 10% for cuts and mistakes. Use 15% when the house has many gables, dormers or angles.
  5. Divide by 100 to get squares. Round up to a whole square. One square covers 100 sq ft.
  6. Divide the siding area by the coverage of one panel or plank to get the piece count.

How many squares of siding for your wall area

Siding is sold by the square. One square is 100 sq ft. This table shows the squares to order for a net wall area, after openings are removed, with 10% waste added.

A single-story house with 8 ft walls and a net wall area of 1,500 sq ft is a common size.
Net wall areaWith 10% wasteSquares to order
1,000 sq ft1,100 sq ft11
1,500 sq ft1,650 sq ft17
2,000 sq ft2,200 sq ft22
2,500 sq ft2,750 sq ft28
3,000 sq ft3,300 sq ft33

Siding coverage per panel and plank

Vinyl is commonly packed by the square, so a box holds one or two squares. Fiber cement is sold by the plank. Because exposure differs between brands, use the coverage printed on the carton and divide your net area plus waste by it.

Exposure is the part of the board you see. Sizes vary by maker, so check the product label.
SidingPiece sizeCovers per piece
Vinyl double 4 panel8 in tall x 12.5 ft8.3 sq ft
Vinyl double 5 panel10 in tall x 12.5 ft10.4 sq ft
Fiber cement lap, 8.25 in board7 in exposure x 12 ft7.0 sq ft

Trim you need with the siding

  • Starter strip runs along the bottom of every wall. Count one 12.5 ft piece for each 12.5 ft of wall.
  • Outside corner posts are about 10 ft long. Count one for each corner, more for walls taller than 10 ft.
  • J-channel frames windows, doors and gable edges. A 3 x 5 ft window needs about 16 ft of J-channel.
  • Inside corners need a post or J-channel too. Add them if your house has an L shape.
  • Trim, soffit and fascia are separate. Measure the roof overhang for those.
  • Add flashing tape and house wrap if you are re-siding down to the sheathing.

Want to pick a color before you buy? See the vinyl siding color ideas on this site, or upload a photo of your house to preview each color.

Tips to order the right amount of siding

  • Order a full square more than you calculate if the siding is a special color. Dye lots can differ between orders.
  • Keep a few spare panels for repairs after the job is done.
  • Long walls waste less with 12.5 ft panels when the wall length fits close to a multiple of the piece length.
  • Measure each wall one at a time if the house has bump-outs, dormers or a second story. Add the areas together.
Small house with sage green vinyl siding, cream trim, white windows and a white front door

Preview siding colors on your own house

After you know how much siding you need, see what it will look like. Upload a photo of your house and our AI renders it in white, gray, sage, blue and more, so you can choose a color before you order.

See vinyl siding colors on a house

Sign in with Google or email to render. New accounts get 1 free render (watermarked).

Frequently asked questions

How do I calculate how much siding I need?

Multiply the distance around the house by the wall height. Add the area of each gable (width x height / 2). Subtract the area of windows and doors. Add 10% for waste. Divide by 100 to get squares. For a 30 ft wide wall that is 9 ft high with an 8 ft gable, that is 270 + 120 - 51 = 339 sq ft before waste.

How much extra siding should I buy?

Add 10% for a typical house. Use 5% for a plain box with few cuts and 15% for houses with many gables, dormers or angles.

How many square feet are in a square of siding?

One square of siding covers 100 square feet of wall. A house with 1,500 sq ft of net wall area and 10% waste needs 16.5 squares, so order 17.

How many pieces of vinyl siding are in a square?

A square holds about 12 double 4 panels (each 12.5 ft long and about 8.3 sq ft) or about 10 double 5 panels (about 10.4 sq ft each). Panel sizes vary by maker, so confirm on the carton.

Do I subtract windows and doors from siding?

Yes. Subtract the area of windows, doors and garage doors, because you do not side over them. The waste allowance then covers the cuts around each opening.

More free tools for architects and designers

Sources: Square of siding (100 sq ft) and the 12.5 ft vinyl panel length are standard industry sizes. Typical window and door sizes are common US dimensions. Panel exposure, carton counts and plank coverage vary by manufacturer; confirm with the product label before you order.