Free tool
How Much Does a Structural Engineer Cost?
Hiring a structural engineer for a house usually costs $500 to $2,000, with a national average of about $1,200, according to Fixr (updated January 2025). They charge $100 to $500 an hour, or $0.50 to $2 per square foot on new builds. A single load-bearing wall inspection can cost as little as $150 to $300. Pick the job below to estimate your cost.
Structural engineer cost calculator
Structural engineer fee
$225
Typical range
$150 to $300
The estimate is the middle of the range for this job type. Ranges from Fixr's structural engineer cost guide (updated 31 Jan 2025). Fees vary by region, firm and scope, so ask for quotes.
Structural engineer fees at a glance
| Fee type | Typical cost |
|---|---|
| National average, home assessment | $1,200 |
| Average range | $500 to $2,000 |
| Hourly rate (Fixr) | $100 to $500 an hour |
| Hourly rate (HomeGuide) | $100 to $220 an hour |
| Per square foot (Fixr) | $0.50 to $2 |
| Percentage of project (Fixr) | 1% to 4% new build, 8% to 20% remodel |
| Low and high extremes | $300 to $20,000 |
Structural engineer cost by job
HomeGuide's 2026 guide gives a similar picture: an inspection at $300 to $900 and an analysis of a load-bearing wall at $250 to $1,000, with an hourly rate of $100 to $220.
| Job | Typical cost |
|---|---|
| Written structural report | $100 to $200 |
| Load-bearing wall inspection | $150 to $300 |
| Foundation inspection | $300 to $600 |
| Roof inspection | $100 to $600 |
| Chimney inspection | $100 to $500 |
| Whole house inspection | $500 to $2,000 |
| Structural drawings | $150 to $1,500 |
| Drafting building plans | $300 to $500 |
| Project management on a larger job | $10,000 to $20,000 |
When you need a structural engineer
- You want to remove or open up a load-bearing wall.
- You are building an addition, a second storey or a new foundation.
- You see cracks, sloping floors or doors that stick, and want to know the cause before you buy a house or repair it.
- You want to add heavy roofing, solar panels or a roof deck to an existing roof.
- You have storm, water or termite damage and need to know if the structure is safe.
Planning the whole build? Try the cost to build a house calculator and the home addition cost calculator, or see what an architect costs.
Structural engineer vs architect vs home inspector
On a new house or an addition, an architect usually brings the structural engineer onto the team, so their fee is part of the design fee. On a smaller job, such as taking out one wall, you may hire the engineer directly.
| Professional | Cost per hour | Role |
|---|---|---|
| Structural engineer | $100 to $500 | Calculates loads and designs the structure |
| Architect | $150 to $400 | Designs the layout and look, and oversees the project |
| Home inspector | $80 to $150 | Looks at the whole house for visible problems |
Ways to spend less
- Be clear about the job: a written report for one wall costs far less than a full house assessment.
- Ask for a flat fee for a defined scope, and for what a revision costs.
- Send photos and a sketch before the visit, so the engineer spends less time on site.
- Get two or three quotes. The same job can be priced differently by different engineers.
See a home extension before you ask for engineering
Many structural jobs start with an extension or a layout change. These examples were made with our AI from a photo of the house, so you can show your engineer and architect what you want. They are concept images, not engineered drawings.



Try an extension idea before you pay for engineering
Upload a photo of your house and see extension, dormer and second-storey ideas in minutes. New accounts get 1 free render, and paid plans start at $6.99 a week.
Try house extension design AISign in with Google or email to render. New accounts get 1 free render (watermarked).
Frequently asked questions
How much does a structural engineer cost?
Fixr puts the national average at about $1,200, with most home jobs between $500 and $2,000 (updated January 2025). A single load-bearing wall inspection can cost $150 to $300, and full design on a new build can reach $20,000.
How much does a structural engineer charge per hour?
Fixr lists $100 to $500 an hour, and HomeGuide lists $100 to $220. The rate depends on the engineer's experience, the type of job and your area.
How much does a structural engineer report cost?
A written report costs $100 to $200 on Fixr, usually after an inspection. A foundation inspection is $300 to $600 and a whole house inspection $500 to $2,000.
How much does it cost to have a load-bearing wall checked?
Fixr lists $150 to $300 for a load-bearing wall inspection, and HomeGuide lists $250 to $1,000 for an analysis. Drawings for the beam or opening add $150 to $1,500.
Do I need a structural engineer for a home extension?
Usually yes. An extension or addition changes how loads reach the foundation, so most local rules ask for stamped structural drawings. Your architect or builder can often bring the engineer in for you.
What is the difference between a structural engineer and an architect?
An architect designs the layout, look and use of the building. A structural engineer calculates loads and designs the frame, foundation and beams so it stays standing.
More free tools for architects and designers
- Architect cost
- Home addition cost calculator
- House extension design AI
- Cost to build a house calculator
- Tile calculator
- Roof pitch calculator
- Architectural scale converter
- Cost to build a house calculator
- King size bed dimensions
- Standard door sizes
- Standard window sizes
- Bathroom vanity height
- Two car garage dimensions
- 1200 sq ft house plans
- Free house plans
Sources: Fixr, "Structural Engineer Cost" (fixr.com/costs/structural-engineer, updated 31 Jan 2025), read 21 Nov 2026; HomeGuide, structural engineer cost guide (2026), read 21 Nov 2026 through a search excerpt because homeguide.com blocks automated fetching. Figures are US averages and vary by region, firm and project.