Free chart and calculator
Lumber Dimensions
A 2x4 is not 2 inches by 4 inches. Dry, planed softwood lumber is sold by its rough "nominal" name but measures 1 1/2 x 3 1/2 inches. The charts below give the actual size of every common board and post, and the converter works out the actual size and board feet for you.
Nominal to actual lumber size calculator
2x4 actual
1 1/2" x 3 1/2"
In millimeters
38 x 89
End area
5.25 sq in
Board feet
5.33
Sizes are for dry, surfaced softwood. Board feet use the nominal size, which is how lumber yards price it: thickness x width (inches) x length (feet) / 12.
Nominal vs actual lumber dimensions
Nominal size is the name on the tag. Actual size is what you measure with a tape. The dashed shapes below are the nominal sizes and the filled shapes are the real ones.
| Nominal | Actual (inches) | Actual (mm) |
|---|---|---|
| 1x2 | 3/4 x 1 1/2 | 19 x 38 |
| 1x3 | 3/4 x 2 1/2 | 19 x 64 |
| 1x4 | 3/4 x 3 1/2 | 19 x 89 |
| 1x6 | 3/4 x 5 1/2 | 19 x 140 |
| 1x8 | 3/4 x 7 1/4 | 19 x 184 |
| 1x10 | 3/4 x 9 1/4 | 19 x 235 |
| 1x12 | 3/4 x 11 1/4 | 19 x 286 |
| 2x2 | 1 1/2 x 1 1/2 | 38 x 38 |
| 2x3 | 1 1/2 x 2 1/2 | 38 x 64 |
| 2x4 | 1 1/2 x 3 1/2 | 38 x 89 |
| 2x6 | 1 1/2 x 5 1/2 | 38 x 140 |
| 2x8 | 1 1/2 x 7 1/4 | 38 x 184 |
| 2x10 | 1 1/2 x 9 1/4 | 38 x 235 |
| 2x12 | 1 1/2 x 11 1/4 | 38 x 286 |
Actual size of 4x4, 6x6 and other posts
| Nominal | Actual (inches) | Actual (mm) |
|---|---|---|
| 4x4 | 3 1/2 x 3 1/2 | 89 x 89 |
| 4x6 | 3 1/2 x 5 1/2 | 89 x 140 |
| 4x8 | 3 1/2 x 7 1/4 | 89 x 184 |
| 4x10 | 3 1/2 x 9 1/4 | 89 x 235 |
| 4x12 | 3 1/2 x 11 1/4 | 89 x 286 |
| 6x6 | 5 1/2 x 5 1/2 | 140 x 140 |
| 5/4 x 6 deck board | 1 x 5 1/2 | 25 x 140 |
Why is lumber smaller than its name?
Boards are named for the size of the rough, wet piece cut at the sawmill. They are then dried and planed smooth on all four sides, and both steps remove wood. The sizes are set by the American Softwood Lumber Standard, PS 20, so a 2x4 is the same size at every yard in the country. The American Wood Council lists the same dry sizes for design.
The rule is easy to remember for most boards:
- Under 2 inches nominal: take off 1/4 inch (a 1x is 3/4 inch thick).
- 2 inches up to 6 inches: take off 1/2 inch (a 2x4 is 1 1/2 x 3 1/2).
- 8 inches and wider: take off 3/4 inch (a 2x8 is 7 1/4 wide).
This is dry lumber, with 19 percent moisture or less. Wet (green) boards are a little larger. Rough-sawn lumber from a mill, and hardwood sold in quarters such as 4/4 (1 inch rough, about 3/4 to 13/16 inch when surfaced), do not follow these sizes.
Standard lumber lengths and stud sizes
| Item | Size |
|---|---|
| Common board lengths | 8, 10, 12, 14 and 16 ft (2 ft steps; 18 and 20 ft are less common) |
| Precut stud, 8 ft wall | 92 5/8 inches |
| Precut stud, 9 ft wall | 104 5/8 inches |
| Precut stud, 10 ft wall | 116 5/8 inches |
| Stud spacing | 16 inches on center (24 inches in some walls) |
| Plywood and OSB sheet | 4 x 8 ft (48 x 96 inches, full size) |
How to calculate board feet
A board foot is 144 cubic inches of wood, or 1 inch by 12 inches by 1 foot. Lumber is priced by it, and you use the nominal size. The formula is thickness (in) x width (in) x length (ft) / 12.
Example: a 2x4 that is 8 feet long is 2 x 4 x 8 / 12 = 5.33 board feet. Ten of them is 53.3 board feet. The converter above does this for any size.

See a timber-frame or wood house design
Describe your idea or upload a sketch, and our AI renders a wood-clad house with the roof shape, siding and timber details you choose.
Try the AI house design generatorSign in with Google or email to render. New accounts get 1 free render (watermarked).
Frequently asked questions
What are the actual dimensions of a 2x4?
A 2x4 is 1 1/2 inches by 3 1/2 inches (38 x 89 mm). It is called a 2x4 because it was cut at 2 by 4 inches before it was dried and planed.
What is the actual size of a 4x4?
A 4x4 post is 3 1/2 inches by 3 1/2 inches (89 x 89 mm). A 6x6 is 5 1/2 by 5 1/2 inches.
What is the actual size of a 2x6 and a 2x8?
A 2x6 is 1 1/2 x 5 1/2 inches and a 2x8 is 1 1/2 x 7 1/4 inches. From 8 inches up, the width loses 3/4 inch instead of 1/2 inch.
How thick is a 1x board?
A 1x board is 3/4 inch thick. The width follows the same rule as 2x lumber, so a 1x4 is 3/4 x 3 1/2 inches and a 1x6 is 3/4 x 5 1/2 inches.
Why is a 2x4 not 2 by 4 inches?
Lumber is named for its rough size at the mill. Drying shrinks it and planing smooths it, so the finished board is smaller. The sizes are set by the American Softwood Lumber Standard (PS 20).
How long is a precut stud?
A precut stud for an 8 ft wall is 92 5/8 inches. With a bottom plate and a double top plate, the finished wall is about 97 1/8 inches, which suits 8 ft drywall sheets run vertically with a small gap at the floor.
More free tools for architects and designers
- AI house design generator
- Tile calculator
- Roof pitch calculator
- Architectural scale converter
- Cost to build a house calculator
- King size bed dimensions
- Standard door sizes
- Standard window sizes
- Bathroom vanity height
- Two car garage dimensions
- 1200 sq ft house plans
- Free house plans
Sources: American Softwood Lumber Standard PS 20 (NIST / American Lumber Standard Committee), American Wood Council dry dressed sizes, and published lumber-yard size charts.