Mumty design
Mumty Design: See a New Look for the Stair Room on Your Roof
A mumty is the small room on top of a flat roof that covers the staircase and opens onto the terrace. It often carries the water tank and is seen from the street, so a plain concrete box can spoil a neat front. People search for mumty designs to give it cladding, a canopy, a glass door or a screen for the tank. This AI mumty design tool starts from a picture: upload a photo of your roof or house, a sketch or a clay model, and ArchitecturesAI renders it in the same view; then describe the finish, the door and the canopy. The result is an idea picture. It is not a structural design, a by-law check or a quote.
Upload your roof or house photoSign in with Google or email to render. New accounts get 1 free render (watermarked).

Before: plain stair room with a tank (AI-drawn stand-in for a photo)

After: stone clad stair room with a canopy
What people do with a mumty
HouseGyan's mumty design ideas and DesignsCAD's mumty elevations show the same choices:
- Cladding the stair room in stone, tiles, wood look panels or a contrast colour so it matches the front elevation.
- A slim canopy or a cantilevered slab over the terrace door.
- A glass door or a tall window to bring light into the stair.
- A screen or a box to hide the water tank from the street.
- Keeping it in line with the parapet and the main front, since it is often the highest point of the house.
How to try a mumty design with ArchitecturesAI
- In the editor above, the mode is Render Architecture, the type is Residential and the style is Modern. This mode has no prompt box: you start from an image.
- Under Select Image, upload a JPG or PNG: a daylight photo of your roof or of your house with the stair room in view, or a sketch, a clay model or a screenshot from your 3D software.
- Click Generate. Free accounts can only use Low quality (Medium and High are marked PRO). Sign in with Google or email when asked.
- To steer the result, click Edit Image on it (the box is called Edit Instructions) or use Custom Action, and describe the stair room finish, the door, the canopy and the tank and what must stay the same. Each edit is another render and uses credits. Run it a few times, since every result differs.
- The three examples below ran directly on our image model with the written instructions shown. They did not go through the editor above, so your own results will differ.
A new look for an existing stair room
A photo from above is enough to try a new finish on the stair room. The model followed the stone and the canopy, but removed the tank instead of screening it, so ask clearly if the tank must stay.

Before: plain stair room with a tank (AI-drawn stand-in for a photo)

After: stone clad stair room with a canopy
A mumty on a new house from a sketch or a model
A sketch or a clay model shows how the stair room will sit on the roof before it is built. The model reads the drawn lines literally, so a sloped line can become a sloped roof.

Before: line sketch with a stair room (AI-drawn stand-in for a hand sketch)

After: sketch turned into a dark grey mumty

Before: clay model with a stair room (AI-drawn stand-in for a 3D model)

After: clay model turned into a wood clad mumty
What the AI keeps and what it may change
- Usually kept: the camera angle, the stair room size and position and the roof.
- Often different from what you asked: water tanks (sometimes removed), doors and windows merged, and roof shapes taken from sketch lines.
- Not covered: building by-laws on roof structures. Check those with your architect.
- Never produced: floor plans, structure, cost estimates or approval drawings.
Looking at other parts of the roof?
The parapet wall page covers the roof edge, the flat roof house page covers whole flat-roofed houses, and the staircase page covers outside stairs.
Free tier and plans
You need a free account to render. New accounts get 1 free render, and free renders carry a watermark. Weekly, monthly and yearly plans for more renders without the watermark are on the pricing page.
The roof, the sketch and the clay model on this page are AI-drawn stand-ins, not real. Each example was run directly on the model, not through the tool above.
Frequently asked questions
What is a mumty?
The small room on a flat roof that covers the top of the staircase and opens onto the terrace. It often holds the water tank.
Can it hide my water tank?
Ask for a screen around the tank and say the tank must stay. In our test the model removed the tank instead, so check the result.
Is there a text box in the editor?
The prompt box exists only in Architecture Generator mode. The editor above opens in Render Architecture, where you upload an image and change the result with Edit Image (Edit Instructions) or Custom Action.
Does it check local by-laws for roof rooms?
No. It makes a picture. Height and area limits for roof structures are for your architect and local authority.
Is it free to try?
Yes. After you sign in, a new account gets 1 free render with a watermark, in Low quality. Paid weekly, monthly and yearly plans are listed on the pricing page.
See a new mumty on your roof
Upload a photo of your roof or your sketch, compare a few finishes and door ideas, and take the best one to your builder. Your first render on a free account is on us.
Upload your roof or house photoRelated: Parapet wall design · Flat roof house design · Staircase design · Front elevation design · AI roof design · Three storey house design · Render Architecture tool · Pricing · AI house design generator · AI cupola design