Chajja design

Chajja Design: See New Sunshades Over Your Windows

A chajja is the projecting sunshade over a window or a door, usually a thin concrete slab, that keeps rain and hot sun off the glass and the wall below. Modern chajjas range from slim flat slabs to box frames that wrap the top and sides of a window, sometimes finished in wood look panels or a contrast colour. This AI chajja design tool starts from a picture: upload a photo of your house front or a sketch, and ArchitecturesAI renders it in the same view; then describe the shape, the depth and the colour of the sunshades. The result is an idea picture. It is not a structural design, a slab detail or a quote.

Upload your house front photo

Sign in with Google or email to render. New accounts get 1 free render (watermarked).

An old faded cream house with thin grey sheet sunshades on metal brackets above the windows

Before: old house with thin sheet shades (AI-drawn stand-in for a photo)

The same house with white framed sunshades with wood look tops above the windows, sitting on the side brackets

After: white box frame chajjas with wood look

An AI-generated pair made with our own image model. The "before" is an AI-drawn stand-in for a photo of an old cream house with thin sheet shades, not a real house. Edit prompt used: "Change ONLY the sunshades: replace each thin stained slab above the windows with a modern box frame chajja that wraps the top and the two sides of the window, white outside with a wood look panel on the underside. Keep the house shape, the windows, the door, the cream walls and the camera angle exactly the same." What followed it: new white framed sunshades over each window; the house shape, the windows, the door and the cream walls stayed. What differs from the prompt: the wood look is on the top of each shade rather than the underside, and the frames do not fully wrap the sides of the windows. We ran this one once.

What a chajja does and the common designs

JK Cement's modern sunshade designs, Comaron's chajja guide and the Studio Matrx glossary describe it the same way:

  • A projection over a window or door, often 450 to 600 mm deep, that keeps rain and direct sun off the opening.
  • Plain flat concrete slabs, the most common and lowest cost.
  • Box frame chajjas that wrap the top and the sides of a window for a modern look.
  • Sloped chajjas that shed rain, common in heavy rain areas.
  • Finishes such as wood look panels, ACP or a contrast paint colour on the edge.

How to try a chajja design with ArchitecturesAI

  1. In the editor above, the mode is Render Architecture, the type is Residential and the style is Modern. This mode has no prompt box: you start from an image.
  2. Under Select Image, upload a JPG or PNG: a daylight photo of the front of your house taken from the street, or a sketch, a clay model or a screenshot from your 3D software.
  3. Click Generate. Free accounts can only use Low quality (Medium and High are marked PRO). Sign in with Google or email when asked.
  4. To steer the result, click Edit Image on it (the box is called Edit Instructions) or use Custom Action, and describe the chajja shape, how far it projects and its colour and what must stay the same. Each edit is another render and uses credits. Run it a few times, since every result differs.
  5. The three examples below ran directly on our image model with the written instructions shown. They did not go through the editor above, so your own results will differ.

New chajjas on an existing house

A photo of the front is enough to try a new sunshade. The model kept the window positions, but a "wood look underside" ended up on top, so check the details.

An old faded cream house with thin grey sheet sunshades on metal brackets above the windows

Before: old house with thin sheet shades (AI-drawn stand-in for a photo)

The same house with white framed sunshades with wood look tops above the windows, sitting on the side brackets

After: white box frame chajjas with wood look

An AI-generated pair made with our own image model. The "before" is an AI-drawn stand-in for a photo of an old cream house with thin sheet shades, not a real house. Edit prompt used: "Change ONLY the sunshades: replace each thin stained slab above the windows with a modern box frame chajja that wraps the top and the two sides of the window, white outside with a wood look panel on the underside. Keep the house shape, the windows, the door, the cream walls and the camera angle exactly the same." What followed it: new white framed sunshades over each window; the house shape, the windows, the door and the cream walls stayed. What differs from the prompt: the wood look is on the top of each shade rather than the underside, and the frames do not fully wrap the sides of the windows. We ran this one once.
A pale yellow two-storey house with two upper windows, two lower windows with grills, a brown door, a thin floor band and a black gate

Before: yellow house without chajjas (AI-drawn stand-in for a photo)

The same house with slim grey concrete chajjas over the two upper windows and the floor band and roof edge painted grey to shade the lower windows

After: slim grey chajjas

An AI-generated pair made with our own image model. The "before" is an AI-drawn stand-in for a photo of a yellow two-storey house in India, not a real house. Edit prompt used: "Add ONLY solid concrete sunshades, no blinds, no awnings: a slim flat grey concrete chajja slab projecting about half a metre above each of the four windows and a wider one above the front door, painted white with a thin grey edge. Keep the house shape, the windows, the door, the gate, the yellow paint and the camera angle exactly the same." What followed it: slim grey slab chajjas over the upper windows; the windows, the gate, the yellow paint and the camera angle stayed. What differs from the prompt: there is no separate wider chajja over the door: the existing floor band and roof edge were painted grey and act as shades for the ground floor, and the slabs are grey rather than white with a grey edge. Added without being asked: the brown front door turned white. This is our second attempt: the first run put roller blind boxes over the windows instead of concrete slabs, so we made a new "before" and ran it again. The pair shown is the second run.

Chajjas on a new house from a sketch

A sketch keeps the sunshades where you drew them and lets you try colours and wall finishes around them.

A black pencil line sketch of a two-storey house with chajjas over the upper windows, a long balcony with railings and a projecting roof slab

Before: line sketch with chajjas (AI-drawn stand-in for a hand sketch)

A photo-like render of the same house with light grey chajjas, pale peach walls, a balcony railing, patterned grills on the ground floor windows, a brown door and a paved yard

After: sketch turned into a peach house with grey chajjas

Both images are AI-generated with our own image model. The sketch is an AI-drawn stand-in for a hand sketch, not a real drawing. Edit prompt used: "Turn this line sketch into a realistic daylight photo of the same house: light grey chajjas, pale peach plaster walls, white window frames with grills, a brown wooden door, a paved yard, blue sky. Keep the house shape, the chajjas, the windows, the balcony and the camera angle exactly the same." What followed it: light grey chajjas, pale peach walls, a brown wooden door, a paved yard and blue sky; the house shape, the chajjas, the windows and the balcony stayed as drawn. What differs from the prompt: only the ground floor windows got patterned grills. Added without being asked: a low grey boundary wall. We ran this one once.

What the AI keeps and what it may change

  • Usually kept: the camera angle, the window and door positions and the walls.
  • Often different from what you asked: which side of the chajja gets a finish, and extra shades the model invents from bands or ledges.
  • Often added without being asked: a new door colour or a boundary wall.
  • Never produced: floor plans, structure, cost estimates or approval drawings.

Looking at other parts of the front?

The window grill page covers grills, the balcony and parapet wall pages cover railings and roof edges, and the front elevation page covers a whole new front.

Free tier and plans

You need a free account to render. New accounts get 1 free render, and free renders carry a watermark. Weekly, monthly and yearly plans for more renders without the watermark are on the pricing page.

The houses and the sketch on this page are AI-drawn stand-ins, not real. Each example was run directly on the model, not through the tool above.

Frequently asked questions

What is a chajja?

A projecting sunshade over a window or door, usually a thin concrete slab, that keeps rain and sun off the opening and the wall below.

Can it replace the old shades on my house?

Yes. Upload a photo of the front and describe the new chajja shape and colour. In our test it replaced thin sheet shades with white framed ones.

Is there a text box in the editor?

The prompt box exists only in Architecture Generator mode. The editor above opens in Render Architecture, where you upload an image and change the result with Edit Image (Edit Instructions) or Custom Action.

Does it give the slab thickness or reinforcement?

No. It shows how the sunshades could look. The slab size and steel are for your engineer.

Is it free to try?

Yes. After you sign in, a new account gets 1 free render with a watermark, in Low quality. Paid weekly, monthly and yearly plans are listed on the pricing page.

See new chajjas on your house

Upload a photo of your house front or your sketch, compare a few sunshade shapes and colours, and take the best one to your builder. Your first render on a free account is on us.

Upload your house front photo

Related: Window grill design · Front elevation design · Balcony design · Parapet wall design · Awning visualizer · Two storey house design · Render Architecture tool · Pricing · AI house design generator