30x50 house design
30x50 House Design: See Your House on the Site First
A 30 by 50 site is 1,500 square feet. Houses on it are often G+1 or duplex with three or four bedrooms, car parking at the front, a staircase inside or outside, and a terrace on top; modern fronts add a decorative jaali screen, pastel colours and vertical windows. People search for 30x50 house designs to compare elevations before they pay for a plan. This AI 30x50 house design tool starts from a picture: upload a photo of your site or your house, a sketch or a clay model, and ArchitecturesAI renders it in the same view; then describe the house you want. The result is an idea picture. It is not a floor plan, a Vastu plan, a structural design or a quote.
Upload your site or house photoSign in with Google or email to render. New accounts get 1 free render (watermarked).

Before: empty 30x50 site (AI-drawn stand-in for a photo)

After: a new G+1 house on the site
What people want from a 30x50 house design
Plan and elevation pages from Brick & Bolt, House Gyan, DesignsCAD and Houseplansdaily describe the same things:
- A 30 by 50 site is 1,500 square feet.
- Common plans are G+1 or duplex houses with three or four bedrooms and car parking.
- Open plans join the kitchen, dining and living areas with few walls.
- Modern fronts use jaali screens, pastel colours, vertical windows and a terrace railing.
- Plans come for east, west, north and south facing sites, and local rules on setbacks still apply.
How to try a 30x50 house design with ArchitecturesAI
- In the editor above, the mode is Render Architecture, the type is Residential and the style is Contemporary. This mode has no prompt box: you start from an image.
- Under Select Image, upload a JPG or PNG: a daylight photo of your house or your empty site taken from the road, or a sketch, a clay model or a screenshot from your 3D software.
- Click Generate. Free accounts can only use Low quality (Medium and High are marked PRO). Sign in with Google or email when asked.
- To steer the result, click Edit Image on it (the box is called Edit Instructions) or use Custom Action, and describe the floors, the jaali, the balcony, the parking and the colours and what must stay the same. Each edit is another render and uses credits. Run it a few times, since every result differs.
- The three examples below ran directly on our image model with the written instructions shown. They did not go through the editor above, so your own results will differ.
A new house on an empty 30x50 site
A straight photo of the site from the road is enough. Our run put a white G+1 house with a jaali screen, a glass balcony and parking between the two neighbours.

Before: empty 30x50 site (AI-drawn stand-in for a photo)

After: a new G+1 house on the site
A first floor on an old house, or a render from a model
An old single floor house keeps its width and can get a first floor in the picture, though ours covered only the middle bay. A clay model keeps the jaali, the staircase and the balcony you made.

Before: old single floor house (AI-drawn stand-in for a photo)

After: a new first floor over the entrance

Before: clay model of a 30x50 house (AI-drawn stand-in for a 3D model)

After: clay model turned into a 30x50 house
What the AI keeps and what it may change
- Usually kept: the camera angle, the road, the neighbours and the site width.
- Often different from what you asked: where the jaali goes, how far a new floor reaches, and gates.
- Often added without being asked: cars, paving and terrace railings.
- Never produced: floor plans, structure, cost estimates or approval drawings.
Looking at a smaller or bigger site?
The 30x40 page covers shorter sites, the 40x60 page covers bigger ones, and the second storey page covers adding a floor to any house.
Free tier and plans
You need a free account to render. New accounts get 1 free render, and free renders carry a watermark. Weekly, monthly and yearly plans for more renders without the watermark are on the pricing page.
The site, the house and the clay model on this page are AI-drawn stand-ins, not real. Each example was run directly on the model, not through the tool above.
Frequently asked questions
How big is a 30 by 50 site?
1,500 square feet. After setbacks the area you can build on is smaller; your local rules and your architect decide how much.
Can it add a first floor to my single floor house?
It can show one in a picture. In our test the new floor covered only the middle bay, so ask in Edit Image for a first floor as wide as the ground floor and run it again.
Is there a text box in the editor?
The prompt box exists only in Architecture Generator mode. The editor above opens in Render Architecture, where you upload an image and change the result with Edit Image (Edit Instructions) or Custom Action.
Does it make a 30x50 floor plan or a Vastu plan?
No. It makes a picture of the outside. Floor plans and Vastu layouts are for your architect.
Is it free to try?
Yes. After you sign in, a new account gets 1 free render with a watermark, in Low quality. Paid weekly, monthly and yearly plans are listed on the pricing page.
See your 30x50 house before you build
Upload a photo of your site, your house or your model, compare a few elevations, and take the best one to your architect.
Upload your site or house photoRelated: 30x40 house design · 40x60 house design · Second storey addition · Two storey house design · Front elevation design · South Indian house design · Render Architecture tool · Pricing · AI house design generator · 40x40 house design